Room Sensors

NOVOS 7 move

The portable stand-alone solution of NOVOS 7 move simplifies the monitoring of indoor air quality and is able to initiate necessary measures improving the air quality. The practical desk display and the connected power supply unit make it possible to use the NOVOS 7 for CO2 measurement as a “plug & monitor” solution. The intelligent traffic light function uses a TFT display and an acoustic signal to indicate when it is time to take appropriate action. For example, the yellow or red background indicates, that the CO2 concentration in the ambient air is too high and the room should be ventilated.

Application/type	CO2 Traffic Light, Room sensor
Purpose	Measure values
Measured values	temperature, relative humidity, CO2
Operating elements	4 favourite buttons
Configuration	NOVOSapp, uConfig
Operating range temperature (°C)	0..+50
Operating range humidity	max. 85% rH non-condensing
Accuracy temperature	±0,5 K (typ. at 21 °C)
Measuring range humidity	0..100% rH non-condensing
Accuracy humidity	±2% between 10..90% rH (typ. at 21 °C)
Measuring range CO2	0..5000 ppm
Accuracy CO2	±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa), self-calibration Dual Channel
Power supply	15..35 V = SELV, 19..29 V ~ SELV, mains adapter 100..230 V (50/60 Hz), max. 0,4A, Flush-mounted power supply 230 V (±10%, 50/60 Hz), max. 0.4 A
Display	TFT 3,5", 320x480 px, with traffic light function, threshold values configurable, optionally configurable via app or uConfig
Enclosure	PC V0
Colour	pure white
Protection (IP)	IP30, according to EN 60529
Connection	tool-free mountable spring clamp, max. 1,5 mm², cable entry via rear opening, predetermined breaking point (bottom) or drilling mark (top)
Mounting	flush-mounted on standard EU box (Ø=60 mm), surface-mounted flat on base using adhesive foil or screws, base part can be mounted and wired separately
Delivery content	incl. stand and power supply unit
Gefahrgut	No