| Application/type |
Power thyristors |
| Configuration |
jumper, DIP switches |
| Output voltage |
reference voltage for potentiometer: 10 V = |
| Output switch contact |
signal contact at 100% Ua, signal contact in case of fault state, changeover contacts, 2A for 230 V ~, floating, output for ohmic and inductive loads, 50 kW (400 V ~ / 75 A), 60 kW (400 V ~ / 90 A), 78 kW (400 V ~ / 120 A) |
| Input |
input for potentiometer 2,5..10 kΩ, input for PTC according to DIN 44081, electrical activation via setpoint signal 0..10 V =, 0..20 or 4..20 mA, optionally configurable |
| Operating range temperature (°C) |
0..+55 |
| Power supply |
L1, L2, L3, N: 400 V ~ 48..62 Hz, self-synchronizing |
| Power consumption |
typ. 202 W, typ. 243 W, typ. 324 W |
| Display |
9 LEDs showing status of the device |
| Enclosure |
aluminium, cover plexiglass |
| Protection (IP) |
IP23 |
| Connection |
power connections, M8 connection screw for cable lug, connection control electronics, max. 1.5 mm² |
| Mounting |
4 mounting holes Ø=8 mm for mounting on galvanized mounting plates (control cabinet) |
| Device length (mm) |
200 |
| Device width (mm) |
140 |
| Device height (mm) |
115 |
| Catalogue table |
Power thyristors |
| Gefahrgut |
No |
