AKF10+ Basic RS485 Modbus 250.06

Duct sensor, Immersion sensor -50..+160 °C | RS485 Modbus | IP65 according to EN 60529
Sensor probe, Ø=6 mm, stainless steel V4A (1.4571), suitable for usage in aggressive media, 250 mm

Application/type	Duct sensor, Immersion sensor
Purpose	Measure values
Sensor elements	temperature
Measured values	temperature
Interface	RS485 Modbus
On stock	No
Configuration	BUS, DIP switches
Sensor	SI-Protection against permeation of humidity and mechanical stress (e.g. vibration)
Network technology	RS485 Modbus
Data transmission	RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
Operating range temperature (°C)	-50..+160
Operating ranges temperature (°C)	-50..+160
Operating range temperature enclosure (°C)	-35..+70
Operating range humidity	max. 85% rH short term condensation
Accuracy temperature	±0,5 K (typ. at 21 °C)
Power supply	15..24 V = (±10%) SELV, 24 V ~ (±10%) SELV
Power consumption	max. 0,7 W (24 V =), 1,8 VA (24 V ~)
Material in touch with media	Sensor probe, Ø=6 mm, stainless steel V4A (1.4571), suitable for usage in aggressive media
Installation length (mm)	250
Enclosure	USE-S, impact- and shock-resistant enclosure with quick-release cover, PC
Colour	pure white
Protection (IP)	IP65, according to EN 60529
Connection	removable cable entry flextherm M20 for wire Ø=4,5..9 mm, removable plug-in terminal, max. 2,5 mm²
Mounting	when used as duct sensors: please use mounting flange MF6DS flexible (+90..+120 °C) or MF6 (brass, +120..+260 °C), for use as immersion sensors please use immersion pocket THVADS / THMSDS
Delivery content	incl. mounting clip enclosure USE-S pure white, incl. mounting set (screws and accessories)
Packaging length (mm)	70
Packaging width (mm)	70
Packaging height (mm)	300
Packaging	case packaging
Device length (mm)	63
Device width (mm)	68
Device height (mm)	290
Gefahrgut	No