Mailversand aktuell eingeschränkt. Möglicherweise erreicht Sie Ihre Bestellbestätigung verzögert.
TS3 three-phase
TS3 three-phase 3-ph 50 A 33 kW
| Application/type | Power thyristors |
|---|---|
| On stock | No |
| Configuration | DIP switches |
| Output voltage | reference voltage for potentiometer: 10 V = |
| Output switch contact | signal contact at 100% Ua, signal contact in case of fault state, changeover contact, 2A for 230 V ~, output for ohmic and inductive loads, 33 kW (400 V ~ / 50 A) |
| Input | input for potentiometer 2,5..10 kΩ, PWM input 5 V / 5..10 kHz, input for PTC according to DIN 44081, input for reset, electrical activation via setpoint signal 0..10 V = or 0..20 mA, optionally configurable |
| Operating range temperature (°C) | 0..+50 |
| Operating ranges temperature (°C) | 0..+50 |
| Operating range humidity | max. 95% rH non-condensing |
| Power supply | L1, L2, L3, N: 400 V ~ 45..65 Hz, self-synchronizing |
| Power consumption | typ. 135 W |
| Display | 4 LEDs showing status of the device |
| Enclosure | aluminium |
| Protection (IP) | IP40, according to EN 60529 |
| Connection | terminal block |
| Mounting | 4 mounting holes Ø=8 mm for mounting on galvanized mounting plates (control cabinet) |
| Device length (mm) | 139 |
| Device width (mm) | 200 |
| Device height (mm) | 140 |
| Gefahrgut | No |